What do you do with the broken drone propeller cables?

First: Re-soldering the broken drone propeller cables

When we meet the drone propeller cables broken, we can use the micro welder to re-solder the wires as follows:

Bend the cable with the handle so that the two ends meet.
Clean up the insulation at both ends of the cable, insert micro-charred copper wire, and then weld.
Then use soldering glue to wrap the cable.

After the welding is completed, we need to use a multimeter to test the quality of the welding to ensure that the drone motor operates normally.

Second: Replace the drone propeller cables

The breakage of drone propeller cables may be caused by aging or external damage, in which case replacing the cables is a more reliable solution.

Using a pair of scissors, cut the break first.
Insert each end of the wire into the soldering base, which needs to be in line with the wire.
Then use cable glands to connect the wires and wrap them with cable ties.
After replacement, we need to test the operation of the propeller motor using a drone simulator.

There are many ways to deal with a broken drone propeller wire, whether it is re-soldering or replacing the wire, it is important to pay attention to safety during operation and conduct the necessary tests to ensure that the motor operates normally. If there is not enough experience, we should to seek the assistance of professional technicians.

Summary

This article describes the problem of broken drone propeller cables and the two solutions of re-soldering and replacing the cables. In the care and maintenance of the drone, we should always pay attention to the wear and aging of the wires, and find and solve the problem in time to ensure flight safety.https://www.bofan-cable.com/product-category/tethered-drone-cable/

For more tethered drone cable knowledge you can follow our website, I will update it regularly.http://www.bofan-cable.com